166 ft of White Gutter and In-Lock Mesh Guards in Atlanta
Atlanta, GA
We replaced the gutters and downspouts on a brick-and-stucco home in Atlanta’s 30314 ZIP, under tall hardwoods. From the street it reads as a one-story home with a front porch, but the lot falls away behind it, so the back of the house is two stories over a walk-out lower level. The old system came down, and we formed 166 feet of new 6-inch K-style gutter on site in white, ran 80 feet of new white 3×4 downspout in the same spots and locked black In-Lock mesh guards onto every foot.
One story in front, two in back
On the back of the house the downspouts drop a full two stories, so they have to be fastened well and sized to carry a lot of water. Twenty feet of fascia behind the old gutters was worn and had to be replaced before new gutter could hang on it. And with tall trees over the roof, open gutters would fill with leaves every fall.
New gutters, new downspouts and steel mesh on top
We took down the old gutters and downspouts and replaced 20 feet of worn fascia. Then we formed 166 feet of 6-inch K-style gutter on site from heavy-duty .032-gauge aluminum in white and hung it in the original locations, with six miter cuts, roof cuts and splash blocks where the runs turn and the roof meets the gutter. We ran 80 feet of new 3×4 downspout in white, made in Atlanta, back down the same corners, with 12 elbows at the tops. Last, we locked In-Lock black mesh guards onto all 166 feet: four-foot sections of heavy-gauge steel with a crimped edge that clamps onto the gutter lip, powder-coated black to blend in with the roof.
Highlights
- 166 ft of 6-inch seamless
- 80 ft of 3×4 downspout
- 20 ft of new fascia
- In-Lock mesh on every foot