Front of a two-story brick-and-stucco Tudor-style home with brown gutters on every roofline, before the upgrade, in Atlanta, GA
Twin front dormers and the short gutter runs between them, before the upgrade, in Atlanta, GA
Front gables and a downspout beside the entry, before the new gutters and downspouts, in Atlanta, GA
Side of the home above the garage driveway, with its gutter and corner downspout before the upgrade, in Atlanta, GA
Two-car garage under a tall half-timbered gable, with the gutters and downspouts before the upgrade, in Atlanta, GA
Rear of the home over a brick patio, with the long gutter runs before the upgrade, in Atlanta, GA
Rear gable and bay windows above the brick patio, before the new gutters, with our company van in the driveway, in Atlanta, GA
Back of the home with an enclosed porch and a bay window under the gutters, before the upgrade, in Atlanta, GA
Brick chimney and the side gutter above an AC unit, before the upgrade, in Atlanta, GA
Narrow wooded side yard below a two-story bay window, before the new gutters and downspouts, in Atlanta, GA
Our estimator’s notebook sketch of the gutter runs, corners and downspout drops, from the estimate visit, in Atlanta, GA
Gutter Replacement

160 ft of Bronze Gutter and Helmet Guards in North Atlanta

Atlanta, GA

ServiceGutter Replacement
CompletedNovember 2, 2026
ClientAtlanta homeowner
Completed By

We replaced the gutter system on a two-story brick-and-stucco Tudor-style home in Atlanta’s 30350 ZIP, on a wooded lot under tall pines. The old gutters and downspouts came down, and we formed 160 feet of new 6-inch K-style gutter on site in Bronze, with High Flow Helmet guards on every run and 130 feet of matching 3×4 downspout in the original locations.

Gables, dormers and two-story downspouts

Steep half-timbered gables, twin dormers and bay windows break this roofline into many short runs, with longer runs across the back over the brick patio. Several downspouts drop the full two stories, and with tall pines around the house, open gutters would need cleaning again and again. At the estimate visit our estimator sketched every run, corner and downspout drop so the new system could go back exactly where the old one was.

160 feet of Bronze with a Helmet on every run

We took down 160 feet of old gutter and the old downspouts, then formed 160 feet of 6-inch K-style aluminum gutter in Bronze on site and hung it on 106 hidden hangers. End caps, a miter at the corner and 12 oval outlets are sealed with tripolymer gutter sealant. We ran 130 feet of new 3×4 downspout in Bronze in the original locations, with 30 elbows and 24 pipe bands holding it to the walls. High Flow Helmet guards in matching Bronze, .024 aluminum with 3/16-inch holes, cover all 160 feet.

Highlights

  • 160 ft of 6-inch seamless
  • High Flow Helmet on every run
  • 130 ft of 3×4 downspout
  • Same downspout spots as before

Related Completed Projects