214 ft of Linen Seamless Gutter on an Atlanta Split-Level
Atlanta, GA
We replaced the gutters and downspouts on a brick-and-siding split-level in Atlanta’s 30349 ZIP, a house with a two-story section, a long one-story wing and a carport, under tall hardwoods. The old system came down, and we formed 214 feet of new 6-inch K-style gutter on site in Linen and ran 100 feet of new 3×4 downspout in the same spots.
A split-level with a long one-story wing
The rooflines step down where the two-story section meets the one-story wing and the carport, so the new runs needed four mitered corners and two roof cuts. At the estimate visit our estimator measured every run and marked the spots where the fascia was damaged. About 18 feet of fascia and 8 square feet of soffit had to be replaced before new gutter could hang there.
214 feet of Linen, with the fascia fixed first
We took down 214 feet of old gutter and the old downspouts. We replaced 18 feet of fascia with primed pine and 8 square feet of soffit, and primed the new wood so it’s ready for the homeowner’s paint. Then we formed 214 feet of 6-inch K-style gutter on site from heavy-duty .032-gauge aluminum in Linen and hung it on 110 hidden hangers, with four miters, two roof cuts and eight oval outlets sealed with tripolymer gutter sealant. The 100 feet of new 3×4 downspout in Linen runs back down the original corners, with 28 elbows and 18 pipe bands.
Highlights
- 214 ft of 6-inch seamless
- 100 ft of 3×4 downspout
- 18 ft of new fascia
- Gutters and downspouts in Linen